By needs

Main Material

Iron connecting rod

Iron connecting rod can be used for four wheel/two wheel, of course, from a small radio control engine to a large plunger pump. Forging iron to casting iron can be used for our connecting rod.

Gun Metal Connecting rod

Gun metal is an alloy of Copper (CU) and tin (SN) and it is generally composed of 90% copper and 10% tin.
Gun metal was used for the cannon barrel because of its tough character.
Because gun metal is easy to work with a casting and excellent in anti-abrasion and anticorrosion, a gun metal connecting rod is used for a plunger pump and air compressor.

Titanium connecting rod

Titanium is strong, light, and excellent in anticorrosion metal. The specific gravity of titanium is about half of iron and the strength is equivalent to steel.
Furthermore, the stable oxide film provides excellence in anticorrosion, and it especially shows perfect anticorrosion against sea water.
Because the material is expensive and difficult to process as a connecting rod, the application is limited to racing or luxury cars.

Abrasion resistance

We mostly use A383.0 (ADC 112) for Aluminum die cast material which is used for general purpose engine. If you want to improve abrasion resistance, you can increase silicon content. Then the material will be harder and the abrasion resistance will be improved.
There is a problem with machinability reduction by increasing silicon content in the material. However, we can propose a special material with abrasion resistance and machinability by using smaller silicon crystals.
We can do special processing on the sliding surface of big and small end bore walls for improving roughness and maintaining lubricant quality.

High strength

If you want the strength of aluminum, you need to use forging material. There is a forging material used for diesel engines which has better character than used for gasoline engines in high temperature and high load.
You can reduce the process by reducing the processing area, because after aluminum powder molding, you get sintered forging material which is superior to conventional forging material in dimensional accuracy.
It is possible to mold the unity structure without defect by agitation powder particles.
If you use aluminum die casting material which is excellent in mass production, the inner quality can be improved by PF (Pore Free die-casting) method and heat-treatment.

Inquiry